1. If you are already connected to Android wirelessly, enable Bluetooth first and forget about WiFi network.
2. Manually join xWiFi network [AUTO-xxx] again, and the password is 88888888 (The pop-up says yes)
3. On your smartphone, enter 192.168.1.101 in the mobile browser and click “Switch P2P”
4. On your phone, go to WiFi >> Advanced Settings >> WiFi Direct, click [AUTO-xxxx] and make sure it’s connected.
6. Once the download is complete, the installation will start, red and blue LED from if fast.
7. Please note: The red and blue leds will continue to light up after the update is complete. Wait another 30 seconds before the final step.
8. After 30 seconds from the previous step, unplug the device and plug it into the car USB jack. After the equipment is finished, please refer to.
1. Connect the U2-X PRO to the car, open the WIFI of the iPhone, and connect the WIFI “AUTO-XXXX”.
2. After the WIFI connection is successful, open the website “192.168.1.101” in the browser and enter the online software upgrade page
3. Fill in the relevant information on the page, set the content details, and then submit the question.
1: Please check whether the original car has Carplay function and select this mode;
2: Please check whether the USB cable is correct, firm and in place according to the instructions;
3: Select other USB ports of the original car, do not insert other devices into other USB ports;
4: Restore the original car system to factory Settings, and then reconnect;
1: Restart the mobile phone and U2-X Pro to ensure that the mobile phone network connection is normal;
2: Change the APP player to change the song;
3: Follow the instructions to upgrade to the latest version of the software online;
Here’s how it works on USB:
1. Find a USB flash drive <32GB, the directory is FAT32, upgrade files
2. Copy the car file update (under.img) to the USB flash drive.
3. 4. Connect the box to the U disk. When the USB interface of the LED box is lit up, the USB interface of the LED box will be automatically upgraded
4. Wait about 2 minutes, we see the LED flash, all the leds are always on, the upgrade is successful
5. Unplug the USB and reconnect the U2-X PRO
After inserting the device, the Bluetooth connection interface will appear. Click Settings to find video mode and audio mode in the second page
Connect U2-X PRO to the car, turn on the WIFI of the iPhone and connect WIFI “AUTO-XXXX”.After the WIFI connection is successful, open the website “192.168.1.101” in the browser and enter the background of the website for Debug audio and video modes
Portuguese 
English